Your cart is currently empty!
ICM255 Fan Blower Control Board
$2799
Available on backorder
Description
The ICM255 Fan Blower Control Board power must be applied before and during the time delay period. When the initiate contact closes, the load energizes and remains energized as long as the initiate contact is closed. The time delay begins when the initiate contact opens. The bag is turned off at the end of the time delay period. If the initiate contact recloses during the time delay period, the burden remains energized, and the time delay is reset to zero. Removal
of the input power during the delay turns off the load and resets the
time delay to zero. A one-second interrogation delay is provided to
avoid nuisance trips due to thermostat bounce or tampering.
The ICM255 Fan Blower Control Board comes packed with features. To start, it is low-cost and has an open board design. Also, it is high power and has a relay output. As well, it has a dual-function fan delay timer. Furthermore, it controls the circulating fan in the heat pump, A/C, and forced air systems. Lastly, its OFF delay purges ducts of residual air.
- ICM255 Fan Blower Control
- Low cost open board design
- High power, relay output
- Dual function fan delay timer
- Controls the circulating fan in heat pump, A/C and forced air systems
- OFF delay purges ducts of residual air
- ON delay allows air to reach the proper comfort level prior to energizing the fan
ICM255 Fan Blower Control | |
Voltage : | 18-30 VAC |
Contact Ratings | |
N.O. : | 20 amps @ 240 VAC |
N.C. : | 10 amps @ 240 VAC |
Time Delays : | |
ON : | 1 second |
OFF : | 60 seconds |
Cycle/Hertz : | 50/60 Hz |
Phase : | Single |
Relay Type : | Fan |
No product questions available.
- No product manuals available.
No product videos available.
- (1) ICM255 Fan Blower Control