ICM450 3-Phase Monitor with 25-Fault Memory

Description

The ICM450 is a 3-Phase Monitor with 25-fault memory, LCD setup, diagnostics, and fault identification. Digital three-phase line voltage monitor offering full line AND load side protection; fully programmable with 25-fault memory; 190-630 VAC (18-240 control VAC). Identifies front and back side faults. Protects against: voltage unbalance, high/low voltage, phase loss, phase reversal, faulty power, incorrect sequencing, and rapid short cycling.

The ICM450 3-Phase Monitor 25-Fault Memory comes packed with features. To begin with, it has a reliable, high-temperature LCD. This simplifies the system setup and diagnostics. It indicates the condition of the incoming line voltage, fault conditions, system set points, and other user adjustments. It features a temperature of -20°C to +75°C (-4°F to + 167°F).

Also, it has a simultaneous voltage display, which is an ICM exclusive. You can view all 3 phases without needing to scroll through readouts. Featured is also a fully adjustable variable; the user can easily set and adjust variables in setup mode. Included are a line voltage: 190 to 600 VAC; voltage    unbalance: 2 to 20%; delay on break period: 0 to 10 minutes; fault interrogation: 0 to 15 seconds; over/under voltage: 2 to 25%; reset modes: AUTO or 0 to 10 retries; and control mode: ON or OFF.

Furthermore, it has 25 fault memory and storage displayed on the LCD. As well as ultra-bright LED indicators that show the current mode, for example, set up the LED, Control voltage LED, Load energized LED, and Fault LED. Lastly, it’s easy to install and configure. It has a simple 7-step push button for the setup. It also features a writing diagram on the unit. An installation and application guide are also included.