FREE Shipping on orders over $50

Bundle Fieldpiece VP85 Vacuum Pump w/ SVG3 Vacuum Gauge & 3-Pack of Pump Oil


Out of stock

Bundle Fieldpiece VP85 Vacuum Pump w/ SVG3 Vacuum Gauge & 3-Pack of Pump Oil

VP85 Vacuum Pump

Fieldpiece is leading the charge in properly performing system evacuation with its new vacuum pumps with RunQuick™ Oil Change System. Available in an 8 CFM DC motor. These revolutionary pumps make evacuation easier and faster.Good oil is a key ingredient of every evacuation. Clearly view your pump oil through the huge oil reservoir window to see the condition of the oil, and the system. When it’s time to change the oil, it’s quick, clean, and easy. With the RunQuick oil change system you can replace the oil in under 20 seconds, even while the pump is running without losing vacuum. Plus the extra wide base helps prevent tipping and spilling oil. Four in-line ports give you tidy hose routing for three different size hoses. Place the cord on the handle for tangle-free storage. Protect gauges and system from oil in unexpected power outages with anti suck-back design.

Product Features

  • On-the-fly oil change in seconds
  • In-line four port manifold for easy access
  • Backlit oil reservoir to view condition of oil and system
  • Sturdy base to stay upright
  • Simple-to-use gas ballast with LED indicator
  • Water resistant to withstand direct rain 15 micron ultimate vacuum
  • Anti oil-suck-back keeps oil out of gauges and system


  • Flow Rate: 8CFM (VP85)
  • Oil Capacity: 8oz (237mL)
  • Oil Compatibility: Fieldpiece Vacuum Pump Oil (Highly refined and optimized for proper sealing and lubrication)
  • Oil Backlight: Blue LED
  • Oil Drain: Ball valve
  • Port Sizes: (1) 1/4”, (2) 3/8”, (1) 1/2”
  • Compressor: Rotary vane, two stage
  • Motor: 3/4 HP Brushless DC (VP85)
  • RPM: 2500 (VP85)
  • Power Source: 95 to 130 VAC @ 60 Hz (VP85)
  • Nominal Current Draw: 9.0 AAC (VP85)
  • Ultimate Vacuum at Input Ports: 15 microns
  • Dimensions: 9.25” x 12.4” x 17.7” (235 mm x 315 mm x 450 mm)
  • Weight: 28 lbs without oil (VP85)
  • Operating Environment: 30°F to 122°F (-1.1°C to 50°C)

SVG3 Vacuum Gauge

The SVG3 Digitial Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook at strap that allows the vacuum gauge to be hung at any angle.The SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimize leaks the SVG3 has a schrader depressor that can connect directly to your core removal tool, or directly to the service port. Fewer connections reduce the potential for leaks unrelated to the system.  The rate indicator helps determine if there are any leaks within the system. When the vacuum reaches the low alarm set point, an audible alarm triggers, the backlight flashes, and the integrated stopwatch restarts to show the technician how long the system has maintained a deep vacuum.  You can set both high and low alarms. And the timer can display how long it took to get to the alarm and how long the vacuum has been maintained.

Product Features

  • Rate Calculator
  • View how fast system pressure is rising or falling
  • Schrader Depressor
  • Minimizes leaks by reducing connections
  • 1 Micron Resolution, 0 – 9999 Micron Range
  • Units of measure:  microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and pascals
  • Alarms and Stopwatch
  • Be alerted when system drops to desired level, and know how long it took
  • Includes
    • Micron Vacuum Gauge – SVG3
    • Tee Fitting
    • Operator’s Manual
    • 4 AAA Batteries

OIL8X3 3-Pack Vacuum Pump Oil

Product Features

  • For use with VP55 and VP85 Vacumum Pumps
  • Highly refined and optimized for top performance
  • Ensures proper sealing and lubrication
  • Produces low vapor pressure
  • Suitable for wide temperature range
  • Size: 8 oz (pack of 3)
Weight 30 lbs
Dimensions 20 × 16 × 14 in