Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 2

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 3

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 4

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 5

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 6

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps - Image 7

Veto Pro Pac MB4B Gatemouth Meter Bag w/Base and Removable Backpack Straps

$239⁹⁵

Brand: Veto Pro Pac GTIN#: 810111060776 MPN#: VPP10529

Description

Description

The Veto Pro Pac MB4B is a gate mouth style meter bag enabling quick and easy access to the inside of the bag. Wear the MB4B over both shoulders using the included backpack straps, over a single shoulder via the optional padded shoulder strap (sold separately), or at your side with the leather-gripped handles. The Veto Pro Pac MB4B comes with the Padded Insert Box. The divider inside the removable padded insert box can be repositioned to secure and separate a meter from other tools; three internal pockets enable further partitioning of tools, and the Veto Pro Pac MB4B features 11 exterior pockets on the side and front as well as a padded tablet computer pocket on the back.

What's Included

(1) MB4B Meter Bag

Features

Maximized Tool Storage Capacity
Vertical oriented gate mouth meter bag
Detachable/optional backpack straps
One customizable storage bay with “pull-out” padded insert box offering movable padded dividers
11 exterior tool pockets
Padded Tablet Pocket on Backside
8" electrical tape strap
Rugged #10 locking zippers
Polypropylene plastic base for moisture and abrasion protection
Other Features
Warranty: 5 Years (see Veto warranty terms and conditions)

Specifications

Height (H) :	17” (43cm)
Width (W) :	14" (35.5cm)
Depth (D) :	8" (20.5cm)
Weight (empty) :	4.5lbs/2kg
Internal Volume :	675in3/ 11L
Max Payload :	40lbs/18kg

Questions

How to keep the Zippers Clean & Lubricated?

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

How to protect the Zippers From Sharp Objects and/or Excessive Heat?

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

How to not Overstuff the Bag?

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Manual