Your cart is currently empty!
Veto Pro Pac PB2-11 Bag
$4995
Brand: Veto Pro Pac GTIN#: 810111060547 MPN#: VPP10524
21 in stock
Description
Veto Pro Pac PB2-11 This pair of 11″/28cm long parts bag offers a range of storage options as each bag is unique. The set include one single-zippered pouch with a transparent back panel as well as a pouch with two seperate zippered compartments. Grab a Sharpie to markup the color-coded webbing to further identify the contents of the 3 compartments. Need additional storage space? These bag nest perfectly inside the CP5 that also comes complete with a single-zippered pouch tucked inside.
- Pair of 11"/28cm long pouches
- 1 Single-zippered pouch & 1 dual-sippered pouch
- Multi-purpose for jobsite and everyday use
- Zippered access
- Stores small tools, fasteners, wire nuts, & assorted other items
- YKK™ Zippers & 600 Denier Nylson body fabric
- Easy to identify color-coded webbing
- Swivel snap hooks attach to tool bag D-Rings
- Warranty: 5 Years (see Veto warranty terms and conditions)
| Height : | 5.5"in/14cm |
| Width : | 11"/28cm |
| Depth : | .5"/1cm |
How To Keep the Zippers Clean & Lubricated?
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
How To Protect the Zippers From Sharp Objects and/or Excessive Heat?
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
How To Don’t Overstuff the Bag?
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
No product videos available.
