Your cart is currently empty!
Veto Pro Pac TA-XLBX Tool Apron with Boxed Pockets
$13595
Brand: Veto Pro Pac GTIN#: 851578000011 MPN#: VPP10056
19 in stock
Description
The Veto Pro Pac TA-XLBX is a full waist and chest apron with a cluster of chest pockets and built with “box” shaped fastener pockets that accept plastic insert boxes to differentiate fasteners and help in emptying contents. Tough, Durable Polyester Canvas. The Veto Pro Pac TA-XLBX has Vertical Tool Pockets: 8 Tool Pockets. 11 Pocket Chest Cluster for Pens, Pencils, Punches, Glasses, Folding Rule, Speed Square, etc. Metal Tape Measure Clip & Tape Pocket. 2 Hammer Holder Loops For Left & Right Handed. Drill Holder Loops On Backside.
- Maximized Tool Storage Capacity
- Vertical Tool Pockets: 8 Tool Pockets
- 11 Pocket Chest Cluster for Pens, Pencils, Punches, Glasses, Folding Rule, Speed Square, etc...
- 2 "Box" Shaped Fastener Pockets To Hold Plastic Insert Boxes To Differentiate Fasteners and Help In Emptying Contents
- Metal Tape Measure Clip & Tape Pocket
- 2 Hammer Loops For Left and Right Handed
- 2 Drill Holder Loops On Backside
- Rugged Materials & Construction
- Tough, Durable Polyester Canvas
- Other Features
- Warranty: 5 Years (see Veto warranty terms and conditions)
| Height : | 22.5” (57cm) |
| Width : | 22" (56cm) |
| Depth : | 3" (7.5cm) |
| Weight (empty) : | 4lbs (1.5kg) |
| Max Payload : | 15lbs (7kg) |
How to keep the Zippers Clean & Lubricated?
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
How to protect the Zippers From Sharp Objects and/or Excessive Heat?
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
How to not Overstuff the Bag?
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
No product videos available.
- (1) TA-XLBX Tool Apron with Boxed Pockets
