Create an account and save 3%-10%. Learn more.
9 in stock
Need Help? Speak with our HVAC and tools experts. Call or text (786) 239-7444.
The Veto Pro Pac Tech-MCT Blackout Tech/Compact Tool Bag comes with Veto Pro Pac’s V-Swap REMOVABLE AND EXCHANGEABLE Tool and Meter Panels. To customize your panel choices from the start (instead of the tool and meter panels), click the Build-Out circle below and visit the Tech-MCT Blackout Build-out page.
The TECH MCT BLACKOUT is a stealth version of the popular TECH MCT featuring Veto Pro Pac’s proprietary V-SWAP system. Alternative tablet and bulk storage panels are available separately and can be swapped-out enabling tool, gear, or job-specific storage solutions. The Blackout version also has vinyl-coated mesh and regular pocket storage on both flap openings. (Includes tool & meter panels; alternate V-SWAP panels available and sold separately)
|Height (H) :||14” (35.5cm)|
|Width (W) :||12" (30.5cm)|
|Depth :||8.5" (21.5cm)|
|Handle Height (HH) :||17" (43cm)|
|Weight (empty) :||7lbs (3kg)|
|Internal Volume :||800in3 (13L)|
|Max Payload :||35lbs (16kg)|
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!