Your cart is currently empty!
Veto Pro Pac Tech-TT Tech Open Tote w/ Removable Panels
$21995
Brand: Veto Pro Pac GTIN#: 851578008031 MPN#: VPP10315
20 in stock
Description
The Veto Pro Pac TECH-TT provides two exterior ‘shop walls’ of tool storage along with open access to all interior tool pockets – keeping gear visible and accessible. Built on a waterproof plastic base the Veto Pro Pac TECH-TT is designed for any tradesperson or technician to quickly store hand tools in vertical pockets as well as larger tools in the center bulk storage section of the bag.
The two removable V-SWAP pocket panels are included with your purchase and enable customizing the interior for creating more or less bulk storage capacity. You may purchase additional panels for the Veto Pro Pac Tech-TT as you like to accommodate more arrangements. A tape measure, small driver or Veto pouch can attach to the stainless mounting clip.
- Maximized Tool Storage Capacity
- 2 Interior, Removable Pocket Panel Sleeves, Totaling 18 Pockets
- 32 Exterior Vertical Tool Pockets
- Waterproof polypropylene plastic base for moisture and abrasion protection
- Shoulder strap
- 8" electrical tape strap
- Stainless Steel Tape Measure Clip
- Rugged Materials & Construction
- Polyester Canvas Body Fabric
- Leather Grips and Trim
- Other Features
- Warranty: 5 Years (see Veto warranty terms and conditions)
| Height : | 13" (33cm) |
| Width : | 16.5" (42cm) |
| Depth : | 7” (18cm) |
| Weight (empty) : | 7lbs (3kg) |
| Max Payload : | 40lbs (18kg) |
| Internal Volume : | 1450in3 (24L) |
How to keep the Zippers Clean & Lubricated?
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
How to protect the Zippers From Sharp Objects and/or Excessive Heat?
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
How to not Overstuff the Bag?
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
- (1) Tech-TT Tool Bag
