Your cart is currently empty!
Veto Pro Pac Tech XL Extra Large Tech Tool Bag
$22495
Brand: Veto Pro Pac GTIN#: 851578000387 MPN#: VPP10071
11 in stock
Description
The Veto Pro Pac Tech XL Service Technician Bag from VETO PRO PAC provides maximum storage with 80 different vertical inside and outside pockets. The bag consists of two storage bays on the front and back. The front storage bay can accommodate tools up to 14-inches long. In the same bay, small pockets for bits and bit extensions add to the utility of this tool storage bag. The back bay of the Veto Pro Pac Tech XL contains large, wide pockets ideal for testers, meters and larger tools. Two flat pickets on the front of the soft-sided tool bag hold instructions and paperwork. The exterior also features a quick-access pocket with small interior pockets for the tools you use most often.
With the Veto Pro Pac Tech XL you can carry your utility knives, flashlights or markers in two vertical pockets on the side of the bag. The sides also feature a strap for your electrical tape and a stainless-steel clip for a tape measure. The extra-wide shoulder strap clips onto the Veto Pro Pac Tech XL attach easily and clips to the rubber ergonomic handle to keep your waterproof tool bag out of the way and off the ground when not in use. To ensure the interior and exterior are waterproof, the pockets of this tool storage bag are made from nylon fabric, while the base is created from 3-millimeter polypropylene. It also boasts double-stitched plastic coil zippers that are tough and protected with large tabs that are easy to grip in work gloves.
- Maximized Tool Storage Capacity
- Vertical Tool Pockets: 80 interior and exterior pockets of various sizes
- Neoprene Pockets: 2 Large, 3 Medium and 9 Small (for bits or memory sticks)
- D-Rings: 4 large and 5 small
- 8” Electrical Tape Strap
- Stainless Steel Tape Clip
- Rugged Materials & Construction
- Waterproof Base: 3mm Injection Molded Polypropylene
- Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
- Handle: Injection Molded Nylon Plastic w/ over-molded ergonomic rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 6 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 38 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
- Other Features
- Shoulder Strap: Extra-Wide, Heavy Duty, Padded Shoulder Strap Clips onto Handle
- Warranty: 5 Years (see Veto warranty terms and conditions)
Height : | 15" (38cm) |
Width : | 16.5” (42cm) |
Depth : | 9.5" (24cm) |
Bag Height (to Handle) : | 20.5" (52cm) |
Weight (empty) : | 8.5 lbs. (4kg) |
Internal Volume : | 1660inc3 (27L) |
Max Payload : | 45lbs (20kg) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
- (1) Tech-XL Tool Bag
Wonderful seller