Veto Pro Pac TP LD Blackout Technician Tool Pouch

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 2

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 3

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 4

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 5

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 6

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 7

Veto Pro Pac TP LD Blackout Technician Tool Pouch - Image 8

Veto Pro Pac TP LD Blackout Technician Tool Pouch

Name: Veto Pro Pac TP LD Blackout Technician Tool Pouch
SKU: vt_vpp10746
Price: 189.95 USD
Availability: InStock

$189⁹⁵

Brand: Veto Pro Pac GTIN#: 810111061544 MPN#: VPP10746

50 in stock

Description

Description

The TP-LD BLACKOUT is a one-sided, closable large service technician tool pouch that can store meters, small hand tools, fasteners and wire nuts, etc. Sporting a extra-deep 8.5″ injection molded base to prevent the bag from tipping over and our V-SWAP™ system, allowing for customizing the interior pocket layout. The TP-LD BLACKOUT comes with the V-SWAP Rear 9-Pocket Panel and the V-SWAP Front Tool Panel. You may purchase additional panels below to offer a variety of configurations. This bag is great for technicians needing a versatile and compact tool storage bag for keeping a variety of service-oriented tools out of the weather and protected. This bag features our stealth all black color pattern.

What's Included

(1) Veto Pro Pac TP LD Blackout Technician Tool Pouch VPP10746

Features

34 Total Exterior and Interior pockets
2 Metal tape clip holders
"Hang-up" hook
Tarpaulin covered rear pocket for added weather & abrasion protection
Detachable over-molded elastomeric grip
YKK® zippers
Waterproof Polypropylene plastic base for moisture and abrasion protection
V-SWAP™ removable tool pocket panel system
Blackout colorway
Warranty: 5 Years (see Veto warranty terms and conditions)

Specifications

Height :	12" (30.5 cm)
Width :	10.5" (27 cm)
Depth :	8.5" (22 cm)
Weight (empty) :	4 lbs/1.8kg
Internal Volume :	310 in3/5 L
Max Payload :	22 lbs/10 kg

Questions

How To Keep the Zippers Clean & Lubricated?

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

How To Protect the Zippers From Sharp Objects and/or Excessive Heat?

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

How To Don’t Overstuff the Bag?

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Manual