Your cart is currently empty!
Veto Pro Pac XXL-F Tool Bag
$27995
Brand: Veto Pro Pac GTIN#: 851578000783 MPN#: VPP10087
22 in stock
Description
The Veto XXL-F tool bag is the soft side version of the carpenter’s wooden tool box; the ultimate horizontal storage.
How Often have you thought to yourself “Damn, I wish I had a Hand Saw?”
Well, now you can pack that serrated sidekick, or a level, or a pry bar, or anything else that requires a little more horizontal territory. The XXL-F tool bag handles longer tools while still providing vertical tool storage in the form of 54 total pockets that can accommodate about 80 tools of varying sizes. Booyeah!
What's Included
- (1) Veto Pro Pac XXL-F
Features
- Maximized Tool Storage Capacity
- Vertical Tool Pockets (inside): 48 inside & 3 outside
- Flat Zippered Pockets (outside): 4 inside & 2 outside
- Neoprene Pockets: none
- D-Rings: 4 large and 5 small
- Exterior Electrical Tape Loop: 8” Fabric with Clip Closure
- Stainless Steel Tape Clip
- Rugged Materials & Construction
- Waterproof Base: 3mm Injection Molded Polypropylene
- Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
- Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 6 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 38 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
- Other Features
- Warranty: 5 Years (see Veto warranty terms and conditions)
Specifications
| Height (BH) : | 10” (25cm) |
| Handle Height (HH) : | 17" (43cm) |
| Width (W) : | 26" (66cm) |
| Depth (D) : | 10" (25.5cm) |
| Weight (empty) : | 10 lbs/4.5 kg |
| Internal Volume : | 1485in3/24 L |
| Max Payload : | 50lbs/23kg |
Questions
How to Keep the Zippers Clean & Lubricated?
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
How to Protect the Zippers From Sharp Objects and/or Excessive Heat?
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Should I Overstuff the Bag?
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Manual
Videos
