Yellow Jacket Leak Detector 69320 ACCUPROBE™ IR

Description

The Yellow Jacket Leak Detector 69320 ACCUPROBE™ IR identifies the minor leaks; it detects all CFC, HCFC, HFC, and HFO refrigerants, including R-134A, R-404A, R-410A, and R-1234YF. The 69320 has a SmartAlarm LED that shows the size of the leak on a rising scale. Coupled with two modes for sensitivity gives the AccuProbe™ IR the ability to locate a leak of any size.

The Yellow Jacket AccuProbe 69320 is an IR Leak Detector with an infrared sensor that will quickly and easily identify minor leaks. The refrigerant leak detector 69320 will detect all CFC, HCFC, HFC, and HFO refrigerants, including R-134A, R404A, R-410A, and R-1234YF.

The IR refrigerant leak detector has an intelligent alarm LED that shows the size of the leak on a rising scale. In addition, with two modes for sensitivity, the Yellow Jacket AccuProbe IR Leak Detector will find a leak of any size. The Yellow Jacket refrigerant leak detector will find all refrigerants except hydrocarbons.

Refrigerant leak detectors are an HVAC technician’s best friend when trying to locate the source of a leak. The ability to diagnose and rectify a problem within a refrigeration system is a vital skill. An IR refrigerant leak detector is the best tool to accomplish a challenging task. The AccuProbe IR refrigerant leak detector weighs less than 1 pound with a sensitivity level as low as 0.10 ounces per year and a sensor life greater than ten years.

In addition, the IR leak detector 69320 has both audible and visual leak indicators, a probe length of 17 inches, a fast charge time of only 3 hours, and the ability to hold the charge when not in use making this the perfect refrigerant leak detector for HVAC and refrigeration contractors to tuck into their tool bag.

Infrared leak detectors are different than heated diode refrigerant leak detectors. Infrared refrigerant leak detectors find refrigerants by sampling an area in a slow and deliberate sweeping pattern. With the Infrared sensors, you don’t hold your probe. Still, you sweep the search back and forth or up and down until the alarm sounds. With an IR leak detector, you must keep moving the sensor instead of letting it sit in one place.

This is necessary because the unit will zero itself out every few seconds. The point of this is to prevent saturation of your detector. With the Infrared leak detector, since it zeros out every few seconds, it will not be overwhelmed as it adjusts to the room and air around it and will look for higher concentrations of refrigerant, allowing you to find the source of the leak quickly. One advantage of the IR leak detectors is that they will trigger the same regardless of what refrigerant it comes across.

The Yellow Jacket AccuProbe IR Refrigerant Leak Detector 69320 is made in the USA.