Your cart is currently empty!
Fieldpiece LT17A Digital Multimeter
$17340
24 in stock
Description
The Fieldpiece LT17A Digital Multimeter manual ranger covers the parameters and ranges you need for most HVACR applications. The LT17A meter measures current, resistance, voltage, capacitance, frequency, continuity, and temperature. Test leads are stored in the meter body and, with the probe tips removed, connect to any Fieldpiece accessory head. The body is durable ABS plastic and comes with a bright blue backlight for poorly lit test areas. Get great accuracy using the included k-type thermocouple and an easily accessible temperature calibration pot.
Its main competitive advantage is the testing capabilities packed into this classic style meter. In addition to all ranges, it has direct temperature measurements. It works with all of our accessory heads to make it one of the complete classic style meters available for HVACR professionals.
Fieldpiece LT17A Digital Multimeter can measure Temperature and Alternating Current/Direct Current Voltage & Current, Frequency, Capacitance, Resistance, Temperature, and Diode Testing. Changeable test leads mean you can change the heads, and the ABS plastic case is highly durable. This meter has a bright backlight and a k-type thermocouple.
Some of the nice features of this Fieldpiece multimeter is it has a continuity indicator. It also offers silicone leads with detachable probe tips. And lastly, it has an auto power-off (APO) to conserve battery life.
- Fieldpiece LT17A Digital Multimeter with Temperature
- Works with Fieldpiece Accessory Heads
- Continuity Indicator
- 400AAC
- Capacitance (MFD)
- Temperature
- Microamps DC – Flame Rectification Tests
- Frequency
- Silicone Leads with Detachable Probe TipsLTCaseStand
- Tilt Stand and Magnetic Hanger
- Bright Blue Backlight
- MAX/MIN hold
- Record the minimum or maximum reading during a measurement. To exit the MIN/MAX function, hold the button for more than 2 seconds
- Volts AC
- Volts DC
- Resistance (Ohms)
- Diode Test
- Rugged ABS case with rubber boot
- Even though it’s a classic style meter it still fits naturally in your hand
- Auto power-off (APO) to conserve battery life
| Fieldpiece LT17A Digital Multimeter with Temperature | |
| DC Voltage | |
| Ranges : | 200mV, 2000mV, 20V, 200V, 600V |
| Resolution : | 0.1mV |
| Accuracy : | 0.5%±1 |
| Input Impedence : | 10MO |
| AC Voltage (50Hz-500Hz) | |
| Ranges : | 200mV, 2000mV, 20V, 200V, 600V |
| Resolution : | 0.1mV |
| Accuracy : | 1.2%±4(200mV to 20V ranges), 2%±4(200V and 600V ranges) |
| Input Impedence : | 10MO |
| DC Current (through meter) | |
| Ranges : | 200µA, 20mA, 200mA |
| Resolution : | 0.1µA |
| Accuracy : | 1.0%±1 |
| Voltage burden : | 800mV |
| AC Current (through meter) | |
| Ranges : | 200µA, 20mA, 200mA |
| Resoltuion : | 0.1µA |
| Accuracy : | 1.5%±4 |
| Voltage burden : | 800mV |
| Frequency (autoranging) | |
| Range : | 10Hz to 40KHz |
| Resoltuion : | 1Hz |
| Sensitivity : | 3.5V rms min |
| Accuracy : | 0.1%± 3 |
| Resistance (ohms) | |
| Ranges : | 200O, 2kO, 200kO, 20MO |
| Resolution : | 0.1O |
| Accuracy : |
|
| Open circuit voltage : | 0.3VDC typical, (3.0VDC on 200O) |
| Diode Test | |
| Accuracy : | 1.5%±3 |
| Test current : | 1.0mA approx. |
| Open circuit voltage : | 3.0VDC typical |
| Capacitance (MFD) | |
| Ranges : | 200µF, 2kµF, 20kµF |
| Resolution : | 0.1µF |
| Accuracy : | 4%±10 |
| Test frequency : | 21Hz |
| Test voltage : | <3.0V |
| Temperature | |
| Ranges : | -30 to 1400°F (-34 to 750°C) |
| Resolution : | 0.1°F/°C |
| Accuracy : |
|
| Sensor type : | K-type thermocouple |
| Field Calibration (temp offset pot) : | |
| : |
|
| Fuse Replacement : | When only certain ranges quit working, check the fuse. Open the case and replace according to the Overload Protection values below. If that doesn’t work visit our Warranty Page.to check for other problems |
| Overload Protection | |
| VAC/DC : |
|
| AAC/DC : | 0.25A/500V fuse (6.3X32mm) |
| Capacitance : | 0.25A/500V fuse (6.3X32mm) model RFM66 |
| Temperature : | 30VAC/DC rms |
| Frequency : | 500VAC/DC rms |
| Resistance : | 500VAC/DC rms |
| Diode Test : | 500VAC/DC rms |
| Continuity : | 500VAC/DC rms |
| Auto-off : | off after 25 minutes to extend battery |
| Indicators : | Continuity beeper (<100O). Low bat |
| Overrange : | "OL" or “-OL” is displayed |
| Operating environment : | 32 to 122°F (0 to 50°C) <70%RH |
| Storage environment (with batteries removed) : | -4 to 140°F (-20 to 60°C) <80%RH |
| Altitude : | 6561.7 feet (2000m) |
| Battery life : | 150 hours typical |
| Battery type : | 9V NEDA 1604 type |
| Stated accuracies : | 74°F±8°F (23°C±4°C), 75%RH |
| Temperature coefficient : | 0.1 x (specified accuracy) 1°F/°C (32 to 66°F (0 to 19°C), 82 to 122°F (28 to 50°C)) |
No product questions available.
- No product manuals available.
No product videos available.
- (1) Classic Style Clamp Meter with Temperature – LT17A
- (1) Deluxe Silicone Test Leads – ADLS2
- (1) 400A Amp Clamp Accessory – ACH4
- (1) Wrap Tab Bead Tip Thermocouple – ATB1
- (1) Short Alligator Lead Extensions – ASA2
- (1) Mail Pouch-Style Instrument Case – ANC5
- (1) 9-Volt Battery (installed)
- (1) Operator’s Manual
